\(\renewcommand{\AA}{\text{Å}}\)

pair_style lj/cut/tip4p/cut command

Accelerator Variants: lj/cut/tip4p/cut/omp

pair_style lj/cut/tip4p/long command

Accelerator Variants: lj/cut/tip4p/long/gpu, lj/cut/tip4p/long/omp, lj/cut/tip4p/long/opt

Syntax

pair_style style args

  • style = lj/cut/tip4p/cut or lj/cut/tip4p/long

  • args = list of arguments for a particular style

lj/cut/tip4p/cut args = otype htype btype atype qdist cutoff (cutoff2)
  otype,htype = atom types for TIP4P O and H
  btype,atype = bond and angle types for TIP4P waters
  qdist = distance from O atom to massless charge (distance units)
  cutoff = global cutoff for LJ (and Coulombic if only 1 arg) (distance units)
  cutoff2 = global cutoff for Coulombic (optional) (distance units)
lj/cut/tip4p/long args = otype htype btype atype qdist cutoff (cutoff2)
  otype,htype = atom types for TIP4P O and H
  btype,atype = bond and angle types for TIP4P waters
  qdist = distance from O atom to massless charge (distance units)
  cutoff = global cutoff for LJ (and Coulombic if only 1 arg) (distance units)
  cutoff2 = global cutoff for Coulombic (optional) (distance units)

Examples

pair_style lj/cut/tip4p/cut 1 2 7 8 0.15 12.0
pair_style lj/cut/tip4p/cut 1 2 7 8 0.15 12.0 10.0
pair_coeff * * 100.0 3.0
pair_coeff 1 1 100.0 3.5 9.0

pair_style lj/cut/tip4p/long 1 2 7 8 0.15 12.0
pair_style lj/cut/tip4p/long 1 2 7 8 0.15 12.0 10.0
pair_coeff * * 100.0 3.0
pair_coeff 1 1 100.0 3.5 9.0

Description

The lj/cut/tip4p styles compute the standard 12/6 Lennard-Jones potential, given by

\[E = 4 \epsilon \left[ \left(\frac{\sigma}{r}\right)^{12} - \left(\frac{\sigma}{r}\right)^6 \right] \qquad r < r_c\]

\(r_c\) is the cutoff.

They add Coulombic pairwise interactions given by

\[E = \frac{C q_i q_j}{\epsilon r} \qquad r < r_c\]

where \(C\) is an energy-conversion constant, \(q_i\) and \(q_j\) are the charges on the 2 atoms, and \(\epsilon\) is the dielectric constant which can be set by the dielectric command. If one cutoff is specified in the pair_style command, it is used for both the LJ and Coulombic terms. If two cutoffs are specified, they are used as cutoffs for the LJ and Coulombic terms respectively.

Style lj/cut/tip4p/long compute the same Coulombic interactions as style lj/cut/tip4p/cut except that an additional damping factor is applied to the Coulombic term so it can be used in conjunction with the kspace_style command and its ewald or pppm option. The Coulombic cutoff specified for this style means that pairwise interactions within this distance are computed directly; interactions outside that distance are computed in reciprocal space.

The lj/cut/tip4p styles implement the TIP4P water model of (Jorgensen), which introduces a massless site located a short distance away from the oxygen atom along the bisector of the HOH angle. The atomic types of the oxygen and hydrogen atoms, the bond and angle types for OH and HOH interactions, and the distance to the massless charge site are specified as pair_style arguments. Style lj/cut/tip4p/cut uses a cutoff for Coulomb interactions; style lj/cut/tip4p/long is for use with a long-range Coulombic solver (Ewald or PPPM).

Note

For each TIP4P water molecule in your system, the atom IDs for the O and 2 H atoms must be consecutive, with the O atom first. This is to enable LAMMPS to “find” the 2 H atoms associated with each O atom. For example, if the atom ID of an O atom in a TIP4P water molecule is 500, then its 2 H atoms must have IDs 501 and 502.

See the Howto tip4p page for more information on how to use the TIP4P pair styles and lists of parameters to set. Note that the neighbor list cutoff for Coulomb interactions is effectively extended by a distance 2*qdist when using the TIP4P pair style, to account for the offset distance of the fictitious charges on O atoms in water molecules. Thus it is typically best in an efficiency sense to use a LJ cutoff >= Coulombic cutoff + 2*qdist, to shrink the size of the neighbor list. This leads to slightly larger cost for the long-range calculation, so you can test the trade-off for your model.

Coefficients

For all of the lj/cut pair styles, the following coefficients must be defined for each pair of atoms types via the pair_coeff command as in the examples above, or in the data file or restart files read by the read_data or read_restart commands, or by mixing as described below:

  • \(\epsilon\) (energy units)

  • \(\sigma\) (distance units)

  • LJ cutoff (distance units)

Note that \(\sigma\) is defined in the LJ formula as the zero-crossing distance for the potential, not as the energy minimum at \(2^{\frac{1}{6}} \sigma\).

The last coefficient is optional. If not specified, the global LJ cutoff specified in the pair_style command is used.

For lj/cut/tip4p/cut and lj/cut/tip4p/long only the LJ cutoff can be specified since a Coulombic cutoff cannot be specified for an individual I,J type pair. All type pairs use the same global Coulombic cutoff specified in the pair_style command.

Warning

Because of how these pair styles implement the coulomb interactions by implicitly defining a fourth site for the negative charge of the TIP4P and similar water models, special care must be taken when using these pair styles with other computations that also use charges. Unless they are specially set up to also handle the implicit definition of the 4th site, results are likely incorrect. Example: compute dipole/chunk. For the same reason, when using one of these pair styles with pair_style hybrid, all coulomb interactions should be handled by a single sub-style with TIP4P support. All other instances and styles will “see” the M point charges at the position of the Oxygen atom and thus compute incorrect forces and energies. LAMMPS will print a warning when it detects one of these issues.

A version of these styles with a soft core, lj/cut/tip4p/long/soft, suitable for use in free energy calculations, is part of the FEP package and is documented with the pair_style */soft styles.

Styles with a gpu, intel, kk, omp, or opt suffix are functionally the same as the corresponding style without the suffix. They have been optimized to run faster, depending on your available hardware, as discussed on the Accelerator packages page. The accelerated styles take the same arguments and should produce the same results, except for round-off and precision issues.

These accelerated styles are part of the GPU, INTEL, KOKKOS, OPENMP, and OPT packages, respectively. They are only enabled if LAMMPS was built with those packages. See the Build package page for more info.

You can specify the accelerated styles explicitly in your input script by including their suffix, or you can use the -suffix command-line switch when you invoke LAMMPS, or you can use the suffix command in your input script.

See the Accelerator packages page for more instructions on how to use the accelerated styles effectively.

Mixing, shift, table, tail correction, restart, rRESPA info

For atom type pairs I,J and I != J, the epsilon and sigma coefficients and cutoff distance for all of the lj/cut pair styles can be mixed. The default mix value is geometric. See the “pair_modify” command for details.

All of the lj/cut pair styles support the pair_modify shift option for the energy of the Lennard-Jones portion of the pair interaction.

The lj/cut/coul/long and lj/cut/tip4p/long pair styles support the pair_modify table option since they can tabulate the short-range portion of the long-range Coulombic interaction.

All of the lj/cut pair styles support the pair_modify tail option for adding a long-range tail correction to the energy and pressure for the Lennard-Jones portion of the pair interaction.

All of the lj/cut pair styles write their information to binary restart files, so pair_style and pair_coeff commands do not need to be specified in an input script that reads a restart file.

The lj/cut and lj/cut/coul/long pair styles support the use of the inner, middle, and outer keywords of the run_style respa command, meaning the pairwise forces can be partitioned by distance at different levels of the rRESPA hierarchy. The other styles only support the pair keyword of run_style respa. See the run_style command for details.

Restrictions

The lj/cut/tip4p/long styles are part of the KSPACE package. The lj/cut/tip4p/cut style is part of the MOLECULE package. These styles are only enabled if LAMMPS was built with those packages. See the Build package page for more info.

Default

none

(Jorgensen) Jorgensen, Chandrasekhar, Madura, Impey, Klein, J Chem Phys, 79, 926 (1983).